Digi TX54, User Manual

Page: 629 / 1087

Services Modbus gateway
TX54 User Guide 629
iv. (Optional) Enable half-duplex (two wire) mode:
(config service modbus_gateway server test_modbus_server)>
serial half_duplex true
(config service modbus_gateway server test_modbus_server)>
c. Repeat the above instructions for additional servers.
5. Configure clients:
a. Type ... to return to the root of the configuration:
(config)> add service modbus_gateway server test_modbus_server)> ...
(config)>
b. Add a client:
(config)> add service modbus_gateway client name
(config service modbus_gateway client name )>
where name is a name for the client, for example:
(config)> add service modbus_gateway client test_modbus_client
(config service modbus_gateway client test_modbus_client)>
The Modbus client is enabled by default. To disable:
(config service modbus_gateway client test_modbus_client)> enable
false
(config service modbus_gateway client test_modbus_client)>
c. Set the connection type:
(config service modbus_gateway client test_modbus_client)> connection_
type
type
(config service modbus_gateway client test_modbus_client)>
where type is either socket or serial . The default is socket .
n
If connection_type is set to socket :
i. Set the IP protocol:
(config service modbus_gateway client test_modbus_client)>
socket protocol
value
(config service modbus_gateway client test_modbus_client)>
where value is either tcp or udp .
ii. Set the port:
(config service modbus_gateway client test_modbus_client)>
socket
port
(config service modbus_gateway client test_modbus_client)>
where port is an integer between 1 and 65535 . The default is 502 .