Digi TX54, User Manual

Page: 369 / 1087

Routing Dynamic DNS
TX54 User Guide 369
Destination Gateway Source Metric
Interface
------------------------ ------------------------ ----------- -------
--- ------------------------
default 10.1.21.1 1
10.1.14.25 10.1.21.1 10.1.21.99 1
/network/device/eth1
10.1.14.27 10.1.21.1 10.1.21.99 1
/network/device/eth1
10.1.25.0/24 10.1.21.99 1
/network/device/eth1
127.0.0.0/8 127.0.0.1
/network/device/loopback
fd00:2704::1 fe80::204:f3ff:fe80:e231 1
fd00:2704::/64 1
fd00:2704::/48
2147483647
fe80::204:f3ff:fe80:e231 fe80::204:f3ff:fe80:e231 1
fe80::204:f3ff:ff80:c525 fe80::204:f3ff:fe80:e231 1
fe80::/64 256
fe80::/64 256
default fe80::204:f3ff:fe80:e231 1
default 1024
IPv4 Route Load Balance (%)
---------- ----------------
wan1 75.0
wwan1 25.0
IPv6 Route Load Balance (%)
---------- ----------------
wan1 75.0
wwan1 25.0
>
You can limit the display to only IPv4 entries by using show route ipv4 , or to IPv6 entries by
using show route ipv6 . You can also display more information by adding the verbose option
to the show route and show route ip_type commands.
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Dynamic DNS
The Domain Name System (DNS) uses name servers to provide a mapping between computer-
readable IP addresses and human-readable hostnames. This allows users to access websites and
personal networks with easy-to-remember URLs. Unfortunately, IP addresses change frequently,
invalidating these mappings when they do. Dynamic DNS has become the standard method of
addressing this problem, allowing devices to update name servers with their new IP addresses.