Digi TX54, User Manual

Page: 977 / 1087

Diagnostics Configure options for the event and system logs
TX54 User Guide 977
(config)> system log persistent true
(config)>
5. (Optional) To disable event categories, or to enable them if they have been disabled:
a. Use the question mark ( ? ) to determine available event categories:
(config)> system log event ?
Event categories: Settings to enable individual event categories.
Additional Configuration
---------------------------------------------------------------------
----------
arping ARP ping
config Configuration
dhcpserver DHCP server
firmware Firmware
location Location
modem Modem
netmon Active recovery
network Network interfaces
openvpn OpenVPN
portal Captive portal
remote Remote control
restart Restart
serial Serial
sms SMS commands
speed Speed
stat Network statistics
user User
wireless WiFi
wol Wake-On-LAN
(config)> system log event
b. Depending on the event category, you can enable or disable informational events, status
events, and error events. Some categories also allow you to set the status interval, which
is the time interval between periodic status events. For example, to configure DHCP server
logging:
i. Use the question mark ( ? ) to determine what events are available for DHCP server
logging configuration:
(config)> system log event dhcpserver ?
...
DHCP server: Settings for DHCP server events. Informational events
are generated
when a lease is obtained or released. Status events report the
current list of
leases.