Digi TX54, User Manual

Page: 788 / 1087

User authentication Example user configuration
TX54 User Guide 788
d. Assign the user to the admin group:
i. Click Groups .
ii. For Add Group , click

.
iii. For Group , select the admin group.
a. Verify that the admin group has full administrator rights:
i. Click Authentication > Groups .
ii. Click admin .
iii. Verify that the admin group has Admin access enabled. If not, click Admin access to
enable.
iv. Verify that Access level is set to Full access . If not, select Full access .
7. Click Apply to save the configuration and apply the change.

Command line
1. Configure a user on the RADIUS server:
a. On the ubuntu machine hosting the FreeRadius server, open the /etc/freeradius/3.0/users
file:
$ sudo gedit /etc/freeradius/3.0/users
b. Add a RADIUS user to the users file:
admin1 Cleartext-Password := "password1"
Unix-FTP-Group-Names := "admin"
In this example:
n
The user's username is admin1 .
n
The user's password is password1 .
n
The authentication group on the TX54 device, admin , is identified in the Unix-FTP-
Group-Names parameter.
c. Save and close the users file.