Digi TX54, User Manual

Page: 495 / 1087

Virtual Private Networks (VPN) Generic Routing Encapsulation (GRE)
TX54 User Guide 495
5. Click to expand Authentication .
6. For Pre-shared key , type testkey .
7. Click to expand Remote endpoint .
8. For Hostname , type public IP address of the TX54-2 device.
9. Click to expand Policies .
10. For Add Policy , click

to add a new policy.
11. Click to expand Local network .
12. For Type , select Custom network .
13. For Address , type the IP address and subnet of the local GRE tunnel, 172.30.0.1/32 .
14. For Remote network , type the IP address and subnet of the remote GRE tunnel,
172.30.0.2/32 .
15. Click Apply to save the configuration and apply the change.

Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>