Digi TX54, User Manual

Page: 919 / 1087

Monitoring Enable the Bluetooth scanner
TX54 User Guide 919
3. Click Monitoring > Bluetooth scanner .
4. Click Enable .
5. (Optional) For Update interval , type the amount of time that the record of a device
connection is kept before the device is considered out of range, and the record is expired from
the database.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format
number { w|d|h|m|s }.
For example, to set Update interval to ten minutes, enter 10m or 600s .
The minimum value is 5 seconds, and the default is 15 seconds.
6. Configure the device to open an SSH port that remote hosts can access:
a. Click to expand SSH stream service .
b. Click Enable .
c. (Optional) For Port , type the port that the Bluetooth scanner will use. The default is 3102 .
d. Click Access control list to configure access control:
n
To limit access to specified IPv4 addresses and networks:
i. Click IPv4 Addresses .
ii. For Add Address , click

.
iii. For Address , enter the IPv4 address or network that can access the device's
SSH service. Allowed values are: