Interfaces
Wide Area Networks (WANs)
TX54 User Guide
118
a. Click to expand
Authentication
.
b. Click
Enable server
to enable the 802.1x authenticator on the TX54 device.
c. Type the
Server IP address
of the authentication server.
d.
Server Port number
defaults to
1812
. Type a new port number for the authentication
server if different than the default.
e. Type the
Server Password
for the authentication server.
f. Set the
Reauth
period.
g. (Optional) Click to expand
Accounting
.
h. Click
Enable server
to enable 802.1x authentication auditing on the TX54 device.
i. Type the
Server IP address
of the auditing server.
j.
Server Port number
defaults to
1813
. Type a new port number for the auditing server if
different than the default.
k. Type the
Server Password
for the auditing server.
9. Configure IPv4 settings:
a. Click to expand
IPv4
.
IPv4 support is enabled by default.
b. For
Type
, select
DHCP address
.
c. Optional IPv4 configuration items:
i. Set the
Metric
.
See
Configure WAN/WWAN priority and default route metrics
for further information
about metrics.
ii. For
Weight
, type the relative weight for default routes associated with this interface.
For multiple active interfaces with the same metric,
Weight
is used to load balance
traffic to the interfaces.
iii. Set the
Management priority
. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
iv. Set the
MTU
.
v. For
Use DNS
, select one of the following:
n
Always
: DNS will always be used for this WAN; when multiple interfaces have
the same DNS server, the interface with the lowest metric will be used for DNS
requests.
n
When primary default route
: Only use the DNS servers provided for this
interface when the interface is the primary route.
n
Never
: Never use DNS servers for this interface.
vi. Enable
DHCP Hostname
to instruct the TX54 device to include the device's system
name with DHCP requests as the Client FQDN option. The DHCP server can then be
configured to register the device's hostname and IP address with an associated DNS
server.
n
See
for further information about DHCP server support for the Client
FQDN option.
n
See
for information about setting the TX54
device's system name.
Summary of Contents for TX54
