Digi TX54, User Manual

Page: 275 / 1087

Wi-Fi Configure a Wi-Fi client and add client networks
TX54 User Guide 275
4. For Add WiFi client: , type the name of the client and click

.
The Wi-Fi client configuration window is displayed.
New Wi-Fi clients are enabled by default. To disable, or to enable a client if it has been
disabled, click
Enable .
5. For Radio , select the appropriate Wi-Fi radio. Applies to dual-Wi-Fi models only.
6. Configure the Wi-Fi network that the client will use:
a. Click to expand SSID list .
b. Enter the SSID of the access point that the client will use to connect to the Wi-Fi network.
c. Select the type of Encryption used by the access point.
n
If a personal or mixed mode is selected, for Pre-shared key , enter the password
that the client will use to connect to the access point.
n
If WPA2 Enterprise is selected:
l
Select the Extensible Authentication Protocol (EAP) , one of:
o
TLS : Client certificate authentication.
If TLS is selected, include:
o The Username .
o
The CA certificate in PEM format.
o The Client certificate in PEM format.
o
The Private key in PEM format.
o
(Optional) The Private key passphrase .
o PEAP : Username/password authentication.
If PEAP is selected, identify the Username and Password .
o
SCEP certificates : Simple Certificate Enrollment Protocol (SCEP) certificate
management.
If SCEP certificates is selected:
o
Identify the Username .
o
Select the SCEP Client . See Configure a Simple Certificate Enrollment
Protocol client for information about SCEP clients.