Digi TX54, User Manual

Page: 43 / 1087

Configuration and management Change the default password for the admin user
TX54 User Guide 43
Interface type Preconfigured interfaces Devices Default configuration
Hotspot
n
hotspot
n
Bridge:
hotspot_
bridge
n
Disabled
n
Authentication
mode: Click-through
n IP address:
10.1.0.1/24
n
DHCP server:
Automatically
enabled (on all
hotspots)
n
DHCP server lease
range: 100-250
Other default configuration settings
Feature Configuration
Central
management n
Digi Remote Manager enabled as the central management service.
Security policies n
Packet filtering allows all outbound traffic.
n
SSH and web administration:
l
Enabled for local administration
l
Firewall zone: Internal
Monitoring n
Device heath metrics uploaded to Digi Remote Manager at 60 minute
interval.
n
SNMP: Disabled
Serial port n
Enabled
n
Serial mode: Login
n
Label: None
n
Baud rate: 115000
n
Data bits: 8
n
Parity: None
n
Stop bits: 1
n
Flow control: None
Change the default password for the admin user
The unique, factory-assigned password for the default admin user account is printed on the bottom
label of the device and on the loose label included in the package.
If you erase the device configuration or reset the device to factory defaults, the password for the
admin user will revert to the original, factory-assigned default password.
To change the default password for the admin user:

WebUI