manualshive.com logo in svg

Basler BE1-951, Instruction Manual

The Basler BE1-951 Instruction Manual provides detailed guidance on how to maximize the functionality of this advanced product. Easily download the manual for free from manualshive.com to unlock the full potential of your Basler BE1-951. Ensure proper installation and operation with this essential user manual.

Share
Download
background image

BE1-951

Reporting and Alarm Functions

i

SECTION 6 • REPORTING AND ALARM

FUNCTIONS

 

TABLE OF CONTENTS

SECTION 6 • REPORTING AND ALARM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
RELAY IDENTIFIER INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

SG-ID Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

IRIG Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Setting the Clock Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

SG-CLK Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Reading and Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

RG-DATE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

GENERAL STATUS REPORTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

General Status Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Input (1234) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Output (A12345) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
CO-OUT (A12345) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
CO-43/143/243/343 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
CO-101 (101SC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
CO-Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Active Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Recloser (79) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Logic Var (00-31), Logic Var (32-63), and Logic Var (64-95) . . . . . . . . . . . . . . . . . . . . . . . 6-4
Active Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Breaker (52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Diag/Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

ENERGY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

RE-KWH Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
RE-KVAR Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
RE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

DEMAND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Demand Calculation and Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Setting Demand Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

SG-DI Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Retrieving Demand Reporting Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

RD Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
RD-TI/YI Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
RD-PI Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
RD-TVAR/YVAR Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
RD-PVAR Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
RD-TWATT/YWATT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
RD-PWATT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Overload and Unbalance Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

SA-DI Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
SA-DVAR/DWATT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

BREAKER MONITORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

Breaker Status Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

Setting the Breaker Status Reporting Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

SB-LOGIC Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Retrieving Breaker Status and Operation Counter Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Courtesy of NationalSwitchgear.com

Summary of Contents for BE1-951









































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BE1-951

3M WORKTUNES WIRELESS User Manual preview
WORKTUNES WIRELESS
Brand: 3M Pages: 23
AC Tool Supply 3M Full Body Harnesses User Instructions preview
3M Full Body Harnesses
Brand: AC Tool Supply Pages: 17
SATA Vision 2000 Operating Instructions Manual preview
Vision 2000
Brand: SATA Pages: 570
COMPERE KPM83MD User Manual preview
KPM83MD
Brand: COMPERE Pages: 41
Sharp AR-5618 Operation Manual preview
AR-5618
Brand: Sharp Pages: 108
Siemens Cerberus Pyrotronics CP2341 Installation Instructions preview
Cerberus Pyrotronics CP2341
Brand: Siemens Pages: 2
Siemens 6AV6881-0AJ21-0AA0 Product Information preview
6AV6881-0AJ21-0AA0
Brand: Siemens Pages: 2
Siemens 6SL3760-8CV00-0FA0 Assembly preview
6SL3760-8CV00-0FA0
Brand: Siemens Pages: 7
Siemens SIMATIC NET LP798-2N Compact Operating Instructions preview
SIMATIC NET LP798-2N
Brand: Siemens Pages: 32
Siemens 7SV512 Instruction Manual preview
7SV512
Brand: Siemens Pages: 136
Siemens 7UM515 Instruction Manual preview
7UM515
Brand: Siemens Pages: 232
Siemens 7SR242 Duobias Technical Manual preview
7SR242 Duobias
Brand: Siemens Pages: 382
Siemens Argus 7SR11 Manual preview
Argus 7SR11
Brand: Siemens Pages: 406
Siemens SIPROTEC 4 User Manual preview
SIPROTEC 4
Brand: Siemens Pages: 734
Siemens SIPROTEC Manual preview
SIPROTEC
Brand: Siemens Pages: 776
RCA P46921 User Manual preview
P46921
Brand: RCA Pages: 64
Kanlux 04-0031 Manual preview
04-0031
Brand: Kanlux Pages: 2
Omron PA4600WS Installation Manual preview
PA4600WS
Brand: Omron Pages: 4

Brands by name

Popular brands

Load more brands