manualshive.com logo in svg

Basler BE1-951, Instruction Manual

The Basler BE1-951 Instruction Manual provides detailed guidance on how to maximize the functionality of this advanced product. Easily download the manual for free from manualshive.com to unlock the full potential of your Basler BE1-951. Ensure proper installation and operation with this essential user manual.

Share
Download
background image

BE1-951

Protection and Control

i

SECTION 4 • PROTECTION AND CONTROL

TABLE OF CONTENTS

SECTION 4 • PROTECTION AND CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Using Protection and Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

SETTING GROUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

SG-SGCON Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Setting BESTlogic Settings, Setting Group Control Function Logic  . . . . . . . . . . . . . . . . . 4-3

SL-GROUP Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Automatic Setting Group Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Automatic Control by Monitoring Line Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Group Control by Monitoring Reclose Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Setting Automatic Setting Group Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

SP-GROUP Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Logic Override of the Setting Group Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

CS/CO-GROUP Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Retrieving Setting Group Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

OVERCURRENT PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

50T Instantaneous Overcurrent Protection with Settable Time Delay . . . . . . . . . . . . . . . . . . 4-12

BESTlogic Settings for Instantaneous Overcurrent Elements . . . . . . . . . . . . . . . . . . . . . 4-13

SL-50T Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

Operating Settings for Instantaneous Overcurrent Elements . . . . . . . . . . . . . . . . . . . . . . 4-14

S<g>-50T Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Retrieving Logic Output Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

51 Time-Overcurrent Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

BESTlogic Settings for Time-Overcurrent Elements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

SL-51  Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Operating Settings for Time-Overcurrent Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

S<g>-51 Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Voltage Restraint/Control for Phase Time-Overcurrent Function . . . . . . . . . . . . . . . . . . . . . . 4-17

Setting Voltage Restraint and Control for Phase Time Overcurrent Function . . . . . . . . . 4-18

S<g>-27R Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Programmable Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Setting Programmable Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

SP-CURVE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

67 Directional Overcurrent Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

S<g>-67N command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Negative Sequence Overcurrent Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Negative Sequence Coordination Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Delta/Wye Transformer Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24
Generator Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

VOLTAGE PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

BESTlogic Settings for the Volts Per Hertz Overexcitation Element . . . . . . . . . . . . . . . . 4-26

SL-24  Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

Operating Settings for the Volts Per Hertz Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

S<g>-24 Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

Volts Per Hertz Programmable Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

SA-24 Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

27P/59P Phase Undervoltage and Overvoltage Protection . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

BESTlogic Settings for Phase Undervoltage and Overvoltage Elements . . . . . . . . . . . . 4-28

SL-27P and SL-59P Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

Operating Settings for Undervoltage and Overvoltage Elements . . . . . . . . . . . . . . . . . . 4-29

S<g>-27P and S<g>-59P Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

Courtesy of NationalSwitchgear.com

Summary of Contents for BE1-951









































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BE1-951

3M DBI-SALA Sealed-Blok 3400800 User Instructions preview
DBI-SALA Sealed-Blok 3400800
Brand: 3M Pages: 15
UltraLux Qi-Shield User Manual preview
Qi-Shield
Brand: UltraLux Pages: 4
JVC HD-ILA HD-Z56RX7 Instructions Manual preview
HD-ILA HD-Z56RX7
Brand: JVC Pages: 25
JVC HD-65S998 - 65" Rear Projection TV Brochure & Specs preview
HD-65S998 - 65" Rear Projection TV
Brand: JVC Pages: 12
JVC HD56FH96 - 56" Rear Projection TV Service Manual preview
HD56FH96 - 56" Rear Projection TV
Brand: JVC Pages: 42
JVC HD56FH96 - 56" Rear Projection TV Brochure & Specs preview
HD56FH96 - 56" Rear Projection TV
Brand: JVC Pages: 4
JVC HD-P61R2 User Manual preview
HD-P61R2
Brand: JVC Pages: 96
JVC HD56FH96 - 56" Rear Projection TV User Manual preview
HD56FH96 - 56" Rear Projection TV
Brand: JVC Pages: 112
JVC HD61Z786 - 61" Rear Projection TV User Manual preview
HD61Z786 - 61" Rear Projection TV
Brand: JVC Pages: 104
JVC I'Art Pro 0705JGI-II-IM User Manual preview
I'Art Pro 0705JGI-II-IM
Brand: JVC Pages: 80
JVC HD-ILA HD-52Z795 User Manual preview
HD-ILA HD-52Z795
Brand: JVC Pages: 96
JVC HD-65S998 - 65" Rear Projection TV User Manual preview
HD-65S998 - 65" Rear Projection TV
Brand: JVC Pages: 88
JVC I'Art 1004TNH-II-IM User Manual preview
I'Art 1004TNH-II-IM
Brand: JVC Pages: 72
JVC I'Art Pro 1204TNH-II-IM User Manual preview
I'Art Pro 1204TNH-II-IM
Brand: JVC Pages: 88
JVC HD-ILA 0407TNH-II-IM User Manual preview
HD-ILA 0407TNH-II-IM
Brand: JVC Pages: 96
JVC HD58S998 - Ultra Slim 1080p HDILA Projection HDTV User Manual preview
HD58S998 - Ultra Slim 1080p HDILA Projection HDTV
Brand: JVC Pages: 88
JVC HD-P61R1 User Manual preview
HD-P61R1
Brand: JVC Pages: 112
JVC I'Art 1003-TN-II-IM User Manual preview
I'Art 1003-TN-II-IM
Brand: JVC Pages: 88

Brands by name

Popular brands

Load more brands