BE1-951
Appendix
B-1
APPENDIX B • COMMAND CROSS-REFERENCE
INTRODUCTION
This appendix lists all ASCII commands, command syntax, brief command descriptions, and any
corresponding HMI screens. Commands are organized by function in the following groups and tables.
&
Miscellaneous (Table B-1)
&
Metering (Table B-2)
&
Control (Table B-3)
&
Report (Table B-4)
&
Setting (Table B-5)
&
Alarm Setting (Table B-6)
&
General Setting (Table B-7)
&
Breaker Monitoring and Setting (Table B-8)
&
Programmable Logic Setting (Table B-9)
&
User Programmable Name Setting (Table B-10)
&
Protection Setting (Table B-11)
&
Global (Table B-12)
An entry of x in the HMI Screen column represents multiple entry possibilities such as 0, 1, 2, or 3 for setting
groups or 43, 143, 243, or 343 for virtual switches.
Table B-1. Miscellaneous Commands
ASCII Command
Function
HMI Screen
ACCESS[=<password>]
Read/Set access level in order to change
settings.
N/A
EXIT
Exit programming mode.
N/A
HELP <cmd> or H <cmd>
Obtain help with command operation.
N/A
Table B-2. Metering Commands
ASCII Command
Function
HMI Screen
M
Read all metered values.
N/A
M-FREQ
Read metered frequency.
3.10
M-I[<phase>]
Read metered current in primary unit.
3.5, 3.6, 3.7
M-PF
Read metered three-phase power factor.
3.9
M-S
Read metered three-phase VA in primary
units.
3.9
M-V[<phase>]
Read metered voltage in primary units.
3.1, 3.2, 3.3
M-VAR or M-Q
Read metered three-phase vars in
primary units.
3.8, 3.8.1,
3.8.2, 3.8.3
M-3V0
Read calculated neutral voltage.
3.4
M-WATT or M-W or M-P
Read metered three-phase watts in
primary units.
3.8, 3.8.1,
3.8.2, 3.8.3
Table B-3. Control Commands
ASCII Command
Function
HMI Screen
CO-<control>[=<mode>]
Control operation.
N/A
CS-<control>[=<mode>]
Control selection.
N/A
CS/CO-43
Control virtual switches
2.1.x
CS/CO-101
Control breaker control switch
2.2.1