manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 66 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 66

9600 Series User Guide

Page 66

 Issue 08b (10 April 2014)

IP Office 9.0

10.7 Editing a Contact

You can edit the contacts in your own personal directory. 

1. Access your personal directory contacts: 

a. Press the 

 CONTACTS key. The directory menu is displayed. 

b. Use the   left and right   arrow keys to select your Personal directory. 

c. Use the 

 up and down 

 arrow keys to scroll through the list or start dialing the name you want to find to

display only matching entries. If you dial a name to return to the full list press the Clear soft key. 

d. To view more details of the highlighted name, press Details. To return to the directory press List. 

2. Locate the required entry. 

3. Press the Details soft key. 

4. Press the More soft key and then the Edit soft key. 

·

The menu now allows editing of the name and number. 

·

Use the 

 up and down 

 arrow keys to switch between number and name entry. 

·

When the name and number have been entered as required, press the Save soft key. 

·

To exit without making any changes, press the Cancel soft key. 

Note: If you have been configured as a system phone user by the system administrator, then you can also add, edit and
delete some external directory contacts. 

10.8 Deleting a Contact

You can delete a contact from your own personal directory. 

1. Access your personal directory contacts: 

a. Press the 

 CONTACTS key. The directory menu is displayed. 

b. Use the   left and right   arrow keys to select your Personal directory. 

c. Use the 

 up and down 

 arrow keys to scroll through the list or start dialing the name you want to find to

display only matching entries. If you dial a name to return to the full list press the Clear soft key. 

d. To view more details of the highlighted name, press Details. To return to the directory press List. 

2. Locate the required entry. 

3. Press the Details soft key. 

4. Press the More soft key and then the Delete soft key. 

5. Press the Delete soft key again to confirm the action. 

Note: If you have been configured as a system phone user by the system administrator, then you can also add, edit and
delete some external directory contacts. 

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments