Home
/
Avaya
/
one-X Deskphone SIP 9620C
/
User Manual

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 128 / 170

Share

Page: 128 / 170

Avaya one-X Deskphone SIP 9620C User Manual Download Page 128

9600 Series User Guide

Page 128

Issue 08b (10 April 2014)

IP Office 9.0

3. Use the

up and down

keys to highlight Self Administer. Press Select.

4. Enter your security PIN and press Done.

5. On 9621 and 9641 phones, select Button Features. Use the

up and down

arrow keys to scroll through the

list of current functions assigned to each button.

·

To remove the existing function from a button press Erase.

·

You can also press More and use the Copy and Paste options to copy the settings of an existing button to
another button.

·

To assign a function to the highlighted button press Replace.

·

Select the required function from the list and press Select.

·

Depending on the function, you may need to enter some information such as a target extension number.

·

The button will be given a default label. To change the label, press More and then select Label. Use the
keyboard to enter the text you want to display for the button label. Note that the label is only shown while
editing the label and after you exit the administration menu.

7. When completed press Back.

«
...
126
127
128
129
130
...
»

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments