Avaya one-X Deskphone SIP 9620C User Manual Download Page 132

Page: 132 / 170

9600 Series User Guide

Page 132

Issue 08b (10 April 2014)

IP Office 9.0

18.10 Viewing Information

You can view information about the phone's settings and current operation. When reporting a problem to your system
administrator, they may ask you to provide some of this information to help resolve the problem.

1. Press the

MENU/HOME button and select Settings.

2. Use the

up and down

arrow keys to highlight Network Info.... Press Select.

3. Use the left and right arrow keys to move through the different pages of information.

Audio Parameters
The settings configured for sound and sound devices.

IP Parameters
The IP settings with which the phone has been configured by the installer or by a DHCP server.

Quality of Service
Quality of Service (QoS) measurements for the current call.

Interfaces
The current speed of the phone's ethernet port and its PC pass-through Ethernet port.

Miscellaneous
Details of the phone and the firmware that it currently has loaded.

4. To return to the parent menu, press the Back soft key.

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Search results

Summary of Contents for one-X Deskphone SIP 9620C

Reviews:

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 132 / 170

Search results

Summary of Contents for one-X Deskphone SIP 9620C

Reviews: