manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 46 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 46

9600 Series User Guide

Page 46

 Issue 08b (10 April 2014)

IP Office 9.0

6. Transferring Calls

You are able to transfer calls even if all your current call appearance buttons are in use. 

1. Press Transfer. The current call is automatically put on hold pending transfer. 

2. Dial the number for the transfer. Alternatively, press Dir to 

select a destination from the directory

 or use the

Redial option, if applicable. 

·

To complete the transfer, press Complete. You can do this while the call is still ringing.

·

Transferring a call while it is still ringing is called an unsupervised transfer. 

·

Transferring a call after ringing finishes is called a supervised transfer.  

·

If the transfer destination does not answer or, after answering the call, does not want to accept the call, press
the Cancel soft key. 

3. Press Complete to complete the transfer. If the transfer destination does not answer or does not want to accept

the call, press the Cancel soft key. 

Notes

·

Calls and Button Status Indication 
The status indication for a call on hold pending transfer differs from that used for standard held calls:

·

On phones with dual lamp buttons, both the green and red lamps fast flash (flutter) when the button
represents a call on hold pending transfer. 

·

On phones with single lamp buttons or status icons, Xfer: is shown in front of the caller ID information rather
than the button name. For example Xfer:Extn299 is shown rather than a = Extn299.

·

The call status information shown when a call on hold pending transfer is highlight is prefixed with 
On-Hold-Xfer rather than On-Hold.

·

Switching Between Calls 
Switching from a connected call to an existing call on hold pending transfer puts the connected call on hold
pending transfer. 

6.1 Transferring to Voicemail

When set to visual voice mode, the 

 key can be used to transfer your current call to the voicemail mailbox of another

user or group. 

1. With the call connected, press the 

 key. You are still connected to the call and can continue talking. 

2. Dial the extension number of the user or group to which you want to transfer the call. 

3. When the number matches a user or group, their name is displayed. 

·

To transfer the call to the user or group's mailbox, press Select. The caller will hear a few seconds of ringing
and then the mailbox greeting. 

·

To exit the transfer menu, press Cancel. 

64

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments