manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 116 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 116

9600 Series User Guide

Page 116

 Issue 08b (10 April 2014)

IP Office 9.0

17.2 Abbreviated Dial

This action can be used as a speed dial button. While setting up the button, enter the number you would like it to dial. 

You can enter a partial number and complete the dialing after pressing the button. For example, you can pre-program a
button with a particular international dialing code. 

17.3 Absence Text

Set or clear an absence text message for display on your phone. This text also appears on the display of the phone
making the incoming call. When setting the message, you can select from a number of pre-configured messages and
then add your own text if you want.

17.4 Auto Intercom

Make a call to another extension that will be connected without ringing if the other phone supports 'auto-answer.'

17.5 Call Forward All

A button with this action can be used to switch 'forwarding unconditional' on/off. 

If set with a preset number, that number is used as the forwarding destination. 

If set without a number, when the button is pressed you will be asked to confirm your existing 'forward unconditional'
destination number or to enter a new number. 

The button's red lamp is lit when forwarding is enabled. On touch screen phones an icon is displayed. The button can be
pressed again to switch 'forward unconditional' off. 

17.6 Call Pickup

Answer a call ringing a user or hunt group. 

The target user or group number from which to pickup a call can be set when the button is configured. If no number is
set, pressing the button will display a menu for number entry. 

17.7 Call Pickup Any

Answer a call currently ringing on the telephone system. 

17.8 Page

A button configured with this action can be used to make a page call. 

The button can be configured with the target user or group for the page. If configured without a number, pressing the
button will display a menu for number entry before making the page call. 

17.9 Self Administer

A button configured for this action can be used to access the 

Self Administer

 menu.

This option is only available if configured by your system administrator.

17.10 Send All Calls

A button configured with this action can be used to switch '

do not disturb

' on or off. When 'do not disturb' is on, the

button's red lamp is lit or a red warning icon is displayed. Pressing the button again turns 'do not disturb' off. 

108

96

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments