manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 114 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 114

9600 Series User Guide

Page 114

 Issue 08b (10 April 2014)

IP Office 9.0

17. Home Screen

The 9621 and 9641 phones have a home screen that contains a number of icons for accessing functions. Some of the
icons are configured by your system administrator, some are fixed. You can 

add up to 8 icons

 to access special

functions. 

The screen is accessed by pressing the 

 HOME key. To exit the screen press the 

 PHONE key. 

Display the Home Screen When Idle

The 

home screen

 used on 9621 and 9641 phones can be set to automatically display if the phone is idle for over 10

minutes. 

1. Press the 

 MENU/HOME button and select Settings.

2. Use the 

 up and down 

 arrow keys to highlight Options & Settings. Press Select. 

3. Use the 

 up and down 

 arrow keys to highlight Screen & Sound Options. Press Select.

4. Select Return to Home Screen to change the current setting for that function. 

5. Press Save. 

115

114

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments