manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 27 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 27

9600 Series User Guide

Page 27

 Issue 08b (10 April 2014)

IP Office 9.0

Making Calls: En-Bloc Dialing

2.2 Call Soft Key Options

The options displayed for the buttons at the bottom of the display will change dynamically to reflect actions that you can
perform during calls or while the phone is idle.

Some or all of these options will only be available if enabled by your system administrator.

·

Account 
Enter an account code to associate with the call. 

·

Answer 
Answer a page call, turning it into a normal call. 

·

CallBack 
Set an automatic callback on the user that you have called but who has not answered. When they next end a call,
the telephone system will call you and when answered, will automatically make a call to the user. 

·

Complete 
Complete the transfer of a held call. A Cancel option is also shown which will end the transfer attempt. 

·

Conference 
Put your current call on hold and present dial tone for you to dial the number you want to add to a conference with
the held caller. 

·

Connect 
Take a call off hold. 

·

Dir 
Access the directory in order to select a number by name rather than dialing it. The type of names available in the
directory is adjusted to match those suitable for use by the feature.

·

Drop 
End the call. 

·

Ignore 
Quiet the ringer for the current alerting call. The call will continue alerting until either answered, it goes to
voicemail, or the caller abandons the call.

·

Pickup 
Answer the call that is held or alerting another user. 

·

Redial 
If there are outgoing numbers in your call log, display the list of those numbers.

·

Transfer 
Put your current call on hold and present dial tone for you to dial the number to which you want to transfer the
call. 

·

ToVM 
Send an alerting call to your voicemail. 

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments