manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 32 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 32

9600 Series User Guide

Page 32

 Issue 08b (10 April 2014)

IP Office 9.0

3. Answering Calls

A slow flashing red lamp on an appearance button indicates an alerting call. This may also be accompanied by 

ringing

and by the 

message lamp flashing

. 

Selected Button

If you are currently not on a call, you can answer the alerting call in the following ways: 

1. Select the method which you want to use to talk to the caller: 

·

To quiet the ringing, press the Ignore soft key. The call will still continue alerting visually and can be
answered or ignored. 

·

To redirect the call to voicemail, press the To VM soft key. 

·

To answer the call using the handset, lift the handset. 

·

To answer the call handsfree, press the   SPEAKER key. 

·

To answer the call on a headset, press the 

 HEADSET key. 

·

Just pressing the call appearance key will answer the call either on the speaker or headset depending on the
phone's 

audio path

 setting. 

2. Once you have answered the call, you can switch between different talk modes: 

·

To switch to using the handset, lift the handset. 

·

To switch to handsfree, press the   SPEAKER key. If you were using the handset you can now safely replace
it. 

·

To switch to headset mode, press the 

 HEADSET key. If you were using the handset you can now safely

replace it. 

·

If you have answered the call on the speaker or headset, pressing the SPEAKER or HEADSET key again
before you select another mode will end the call. 

·

Just pressing the call appearance key or any other appearance button will put the current call on hold. 

Answering Another Call

If you are already on a call, answering a new call will automatically put the existing call on hold

[1]

, unless your first press

Drop.

1. Using the 

 up and down 

 arrow keys, scroll the display highlight the waiting call. 

·

To quiet the ringing, press the Ignore soft key. The call will still continue alerting and can be answered or
ignored. 

·

To redirect the call to voicemail, press the To VM soft key. 

2. To answer the call, press the call appearance button. Your existing call will be put on hold. 

Note: This guide assumes that auto hold is enabled (the default). The system administrator can disable auto hold for the
system, in which case calls are automatically disconnected rather than held. 

121

122

57

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments