manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 59 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 59

9600 Series User Guide

Page 59

 Issue 08b (10 April 2014)

IP Office 9.0

Headset/Handsfree Operation: Headset Operation

9.2 Handsfree Speaker Operation

Your phone has a speaker and microphone that allows you make and answer calls handsfree. The speaker is located
under the handset. The microphone is located near the bottom right of the phone's keypad. 

·

If there are no currently connected calls to which you are talking, a call answered by pressing its appearance
button is connected either handsfree or through the headset according to the phone's 

audio path setting

.

·

If there is already a connected call to which you are talking handsfree, answering another call by pressing the
appearance button answers that call handsfree. 

Conference Phones

Your phone is not designed as a conference room speakerphone. It is designed for use by a speaker located directly in
front of the phone with no obstructions between themselves and the microphone. Phones designed to be used as
conference speakerphones typically have multiple microphones and are able to handle sounds coming from multiple
directions. For details of conference speakerphones supported by your phone system contact your system administrator. 

Using Handsfree

To answer a call handsfree: 

1. To answer a call handsfree, press the   SPEAKER button. The button remains lit whilst you have a call connected

handsfree. 

To end a handsfree call: 

1. To end a handsfree call, press the   SPEAKER button. 

To switch from handsfree to the handset: 

1. To switch from handsfree to the handset, simply lift the handset. 

To switch to handsfree from the handset: 

1. To switch to handsfree from the handset, press the   SPEAKER button. The button remains lit whilst you have a

call connected handsfree.

2. Replace the handset. 

To switch from handsfree to the headset: 

1. Press the 

 HEADSET button. See 

Headset Operation

.

To switch to handsfree from the headset: 

1. Press the   SPEAKER button. The button remains lit whilst you have a call connected handsfree. 

To mute the call while handsfree: 

1. Press the   MUTE button. The button remains lit whilst the call is muted. Note that if you switch to the handset or

headset, the mute is automatically canceled. 

Handsfree Operation Settings

You can adjust the following handsfree settings: 

·

Speaker Volume

 

·

Default Audio Path

 

·

Speaker Automatic Gain Control On/Off

 

57

59

60

60

60

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments