manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 136 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 136

9600 Series User Guide

Page 136

 Issue 08b (10 April 2014)

IP Office 9.0

19.5 Forward On No Answer

If your phone is set to '

forward on no answer

' you can clear or change the forward settings through the Status

menu. 

1. Press the Status soft key if shown. 

·

To access the Status menu during a call, press the 

 PHONE key and then press the Status soft key if

shown.

2. Use the 

 up and down 

 arrow keys to highlight Fwd No Answer. 

3. To switch the forward off press Off.

4. To change the forward setting press Details. 

·

Use the 

 up and down 

 arrow keys to scroll through the menu options. 

·

To switch 'forward on busy' on or off, highlight Fwd Busy and press On or Off. 

·

To switch 'forward on no answer' on or off, highlight Fwd No Answer and press On or Off. 

·

To select which calls are forwarded highlight Call Type. Press Change to change the option between
 All Calls or External Calls Only. 

·

To change the destination highlight Destination and press Edit. Enter the number and press Select.

·

Press Save to save any changes. 

Access Control

Your system administrator can configure whether you can access this menu option. See 

Menu Access Control

. 

19.6 Forward Unconditional

You can clear or change your 'forward unconditional' settings through the Status menu. 

1. Press the Status soft key if shown. 

·

To access the Status menu during a call, press the 

 PHONE key and then press the Status soft key if

shown.

2. Use the 

 up and down 

 arrow keys to highlight Fwd Uncon. 

·

To switch off 'forward unconditional,' press the Off soft key. 

·

To change the forwarding settings, press the Details soft key. 

·

Use the 

 up and down 

 arrow keys to scroll through the editing options. 

·

Use the   left and right   arrow keys to switch the forwarding on or off.  

·

Use the   left and right   arrow keys to select which calls should be forwarded. The options are
External Only, External and Group, Non Group Calls, and All Calls. 

·

Select edit to change the number to which calls are forwarded. 

Access Control

Your system administrator can configure whether you can access this menu option. See 

Menu Access Control

. 

19.7 Forwarded Here

This option allows you to see the names of users who are currently forwarding calls to you. It includes 'forward
unconditional,' 'forward on no answer,' and 'forward on busy.' A separate entry is shown for each user. 

1. Press the Status soft key if shown. 

·

To access the Status menu during a call, press the 

 PHONE key and then press the Status soft key if

shown.

2. Use the 

 up and down 

 arrow keys to highlight Fwd To Here. 

Access Control

Your system administrator can configure whether you can access this menu option. See 

Menu Access Control

. 

159

154

154

154

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments