manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 34 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 34

9600 Series User Guide

Page 34

 Issue 08b (10 April 2014)

IP Office 9.0

3.4 Using Call Pickup

Pickup is used to answer a call ringing elsewhere on the phone system. 

1. Press the Features soft key if shown. To do this during a call, press the 

 PHONE key and then press the

Features soft key.

2. Use the 

 up and down 

 arrow keys to highlight Pickup. Press Select. 

·

To answer a ringing call, press the Any soft key. 

·

To answer a call ringing against a particular target, dial the target's number. Alternatively, press the Dir soft
key to 

select the target from the directory

. 

3. The following menus will appear depending on the type of number entered: 

·

User Number 

·

To answer a call ringing against the user, press the Pickup soft key. 

·

To return to entering a number, press the Clear key. 

·

Hunt Group Number 

·

To answer a call ringing against the members of the group, press the Members soft key. The call does
not have to be a call to the hunt group. 

·

To answer a call ringing for the hunt group, press the Group soft key. 

·

To return to entering a number, press the Clear key.

Access Control

Your system administrator can configure whether you can access this menu option. See 

Menu Access Control

. 

Default Short Codes

Short codes are numbers that you can dial to enable and disable various features. The following are default short codes
that may be available. However, your system administrator can remove and change the short codes available to you or
all users. 

·

Pickup Any Call: *30 
Answer a call ringing on the telephone system. 

·

Pickup a Group Call: *31 
Answer a call ringing a group of which you are a member. You can use this even if your group membership is
currently set to disabled. 

·

Pickup a Users Call: *32*N# 
Pickup a call ringing a user's extension number (N). 

·

Pickup a Group Members Call: *53*N# 
Pickup a call ringing the members of a group (N). This does not necessarily have to be a group call. 

64

154

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments