manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 154 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 154

9600 Series User Guide

Page 154

 Issue 08b (10 April 2014)

IP Office 9.0

22.3 A Menu

This menu is used mainly for phone specific settings that are stored by the phone rather than settings that are stored by
the phone system and move with you when you log into another phone. 

The menu is accessed by pressing the 

 key. On some phones, press the 

 key and then select 

 Settings. Note

that the options available vary between different models of 9600 Series telephone. 

22.4 Menu Access Control

Some menu options are dynamic and only appear when appropriate. For example, the Features menu cannot be
accessed when the phone is locked. Access to other menu options is controlled by your system administrator. They can
set system wide rules for which options phone users can access. They can also set specific rules for each phone user. 

Even if you are restricted from accessing an option, it may still be applied for you by your system administrator. For
example, the system  administrator may configure call forwarding settings for you. 

The system administrator can control your menu access to the following groups of functions: 

·

Basic Call Functions 
Controls whether you can access the phone's menu options for call pickup, park, unpark and transfer to mobile
functions. 

·

Advanced Call Functions 
Controls whether you can access the phone's menu options for do not disturb, account code, withhold number and
internal auto-answer functions. In addition, the Account Code menu is only shown if the system has been
configured with accounts codes. 

·

Forwarding Functions 
Controls whether you can access the phone's menu options for forwarding and follow me functions. 

·

Hot Desk Functions 
Controls whether you can access the menu options for logging in and out.  

·

Passcode Change 
Controls whether you can change your login code (security credentials).  

·

Phone Lock 
Controls whether you can access the menu options for locking the phone and for setting it to automatically lock. 

·

Self Administration 
Controls whether you can access the Self-Administration menu option.  

·

Voicemail Controls 
Controls whether you can access the Visual Voice option through the phone's Features menu. Your system
administrator can also disable the Messages button from accessing the visual voice menus. 

·

Group Controls 
The system administrator is able to configure if you can access the Membership, State and Fallback options of a
group. If you are not configured for any groups then the Group menu is not shown. 

·

Mobility Controls 
The Mobile Twinning options are only shown if you have been configured to use mobile twinning.

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments