manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 50 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 50

9600 Series User Guide

Page 50

 Issue 08b (10 April 2014)

IP Office 9.0

7. Account Codes

The telephone system can store a number of account codes. Account codes may be used to keep track of calls in relation
to particular activities or clients. They can also be used to keep track of calls by particular users or sets of users. 

·

When an account code is entered while making a call or during a call, that account code is included in the call
records output by the system. 

·

Accounts entered are checked against those stored by the telephone system. If an invalid code is entered, the
account code is requested again. 

·

The system administrator can configure certain numbers or types of numbers to require entry of an account code
before you can continue making a call to such a number. 

·

The system administrator can also configure a requirement for you to enter an account code before making any
external call. 

7.1 Forced Account Code Entry

The system administrator can configure certain numbers or types of numbers to require entry of an account code before
you can continue making a call to such a number. 

1. The Account Code menu is displayed when you are required to enter an account code.  

2. Enter the account code that you want to use. 

3. Press the Done soft key. 

4. If the account code was not a valid account code, the REENTER ACCOUNT menu is displayed. 

7.2 Manual Account Code Entry

You can enter account codes during a call or before making a call. The account code that you enter must match an
account code set on the telephone system. 

1. Press the Features soft key if shown. To do this during a call, press the 

 PHONE key and then press the

Features soft key.

2. Use the 

 up and down 

 arrow keys to highlight Call Settings. Press Select. 

4. Use the 

 up and down 

 arrow keys to highlight Account Code. 

5. Press the Set soft key or the OK button or the   right arrow key. 

6. Enter the account code that you want to use. 

7. Press the Done soft key. 

8. If the account code was not a valid account code, the Failed menu is displayed. 

Access Control

Your system administrator can configure whether you can access this menu option. See 

Menu Access Control

. 

Feature Button

Access to the enter account code menu can be assigned to a 

feature button

 configured with the Account Code Entry

action. The button can also be preset with a specific account code. 

154

108

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments