manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 131 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 131

9600 Series User Guide

Page 131

 Issue 08b (10 April 2014)

IP Office 9.0

Phone Settings: Volume and Sound

18.9 Backup/Restore

If backup/restore has been setup by your system administrator, it is used automatically when you log in and log out of
the phone.

Backup/restore is used for the phone settings that you have configured within the menus provided by the phone's 
MENU/HOME button. When you log in at another 1600 or 9600 Series phone extension, your phone settings are
restored and applied to that phone. They will remain applied to that phone until another user logs in and their phone
settings are applied. 

By default, your call log and your personal contacts are stored on the telephone system. These will be restored by the
telephone system when you log in on another 1600 or 9600 Series phone regardless of whether backup/restore has been
configured for the 1600 and 9600 Series phones. 

When backup/restore has been configured, the phone menu provides options to manually access backup and restore
functions.

·

Manually Backup Phone Settings

·

Manually Restore Phone Settings

18.9.1 Backup

If backup/restore has been setup by your system administrator, it is used automatically when you log in and log out of
the phone.

In addition, the option below is available to manually trigger a backup of your user settings. 

1. Press the 

 MENU/HOME button and select Settings.

2. Use the 

 up and down 

 arrow keys to highlight Advanced Options. Press Select.

3. Use the 

 up and down 

 arrow keys to highlight Backup/Restore. Press Change.

4. Use the 

 up and down 

 arrow keys to highlight Manual Backup. Press Backup.

·

!

 This option is only available if your system administrator has configured backup/restore operation. 

18.9.2 Restore

If backup/restore has been setup by your system administrator, it is used automatically when you log in and log out of
the phone.

In addition, the option below is available to manually trigger a restore of your user settings. 

1. Press the 

 MENU/HOME button and select Settings.

2. Use the 

 up and down 

 arrow keys to highlight Advanced Options. Press Select.

3. Use the 

 up and down 

 arrow keys to highlight Backup/Restore. Press Change.

4. Use the 

 up and down 

 arrow keys to highlight Manual Restore. Press Restore.

·

!

 This option is only available if your system administrator has configured backup/restore operation. 

131

131

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments