manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 11 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 11

9600 Series User Guide

Page 11

 Issue 08b (10 April 2014)

IP Office 9.0

Introduction:  

1. Introduction

This guide is for 9600 Series telephones supported an Avaya IP Office telephone system running in IP Office Essential
Edition, Preferred Edition, Advanced Edition or Server Edition mode..

·

9600 Series Phones
These IP phones are supported by IP Office and other Avaya telephone systems. Running H.323 firmware, the
supported phones are:

Phone

Programmable

Buttons

Colour

Screen

Touch

Screen

Gigabit*

Headset

Speaker

Phone

Button

Module

Support

9608

24

No

No

No

Yes

Yes

BM12 x 3 

SBM24 x 3

9608G

24

No

No

Yes

Yes

Yes

BM12 x 3 

SBM24 x 3

9611G

24

No

No

Yes

Yes

Yes

BM12 x 3 

SBM24 x 3

9620L

24

No

No

No

Yes

Yes

–

9620C

24

Yes

No

No

Yes

Yes

–

9621G

24

Yes

Yes

Yes

Yes

Yes

–

9630G

24

No

No

Yes

Yes

Yes

SBM24 x 3

9640

24

Yes

No

No

Yes

Yes

SBM24 x 3

9640G

24

Yes

No

Yes

Yes

Yes

SBM24 x 3

9641G

24

Yes

Yes

Yes

Yes

Yes

BM12 x 3 /

SBM24 x 3

9650

24

No

No

No

Yes

Yes

SBM24 x 3

9650C

24

Yes

No

No

Yes

Yes

SBM24 x 3

·

Gigabit Support 
This column indicates that the phone natively supports Gigabit Ethernet. Other phones can support Gigabit through
the use of a suitable Gigabit adapter. 

·

Unsupported Features 
The 9600 Series phones are supported on a number of Avaya telephone systems and support different features
depending on the telephone system. This guide covers only the features supported on an Avaya IP Office
telephone system. 

1.1 Important Safety Information

!

 Warning: This handset may pick up small metal objects such as metal pins or staples. 

·

During a power surge, EFT (Electronically Fast Transients), or ESD (Electrostatic Discharge), calls may be dropped.
After a power surge, EFT or ESD, it is normal for the phone to restart.

·

Using a cell phone, mobile phone, GSM phone or two-way radio in close proximity to an Avaya telephone might
cause interference.

·

The phone should not be connected directly to the outdoor telecommunication network.

12

12

13

14

14

15

16

17

17

18

19

19

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments