manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 56 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 56

9600 Series User Guide

Page 56

 Issue 08b (10 April 2014)

IP Office 9.0

9. Headset/Handsfree Operation

9.1 Headset Operation

Your phone has a headset socket located under the phone. This is suitable for the connection of phone headsets that
connect via a HIS headset cable. 

·

If there are no currently connected call to which you are talking, a call answered by pressing its appearance button
is connected either handsfree or through the headset according to the phone's 

audio path setting

. 

·

If there is already a connected call to which you are talking through the headset, answering another call by
pressing the appearance button will answer that call using the headset. 

Using a Headset

To answer a call using a headset: 

1. To answer a call using the headset, press the 

 HEADSET button. The button remains lit whilst you have a call

connected on the headset. 

To end a headset call: 

1. To end a headset call, press the 

 HEADSET button. 

To switch from the headset to the handset: 

1. To switch from the headset to the handset, simply lift the handset. 

To switch to handsfree from the headset: 

1. To switch to handsfree from the headset, press the 

 HEADSET button. The button remains lit whilst you have a

call connected on the headset.

2. Replace the handset. 

To switch from the headset to handsfree: 

1. Press the   SPEAKER button. See 

Handfree Speaker Operation

.

To switch to headset from handsfree: 

1. Press the 

 HEADSET button. The button remains lit whilst you have a call connected handsfree. 

To mute the call while on the headset: 

1. Press the   MUTE button. The button remains lit whilst the call is muted. Note that if you switch to the handset or

handsfree, the mute is automatically canceled. 

Headset Operation Settings

You can adjust the following headset settings: 

·

Headset Volume

 

·

Default Audio Path

 

·

Headset Automatic Gain Control On/Off

 

57

59

57

57

57

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments