manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 170 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 170

9600 Series User Guide

Page 170

 Issue 08b (10 April 2014)

IP Office 9.0

Performance figures and data quoted in this document are typical, and must be

specifically confirmed in writing by Avaya before they become applicable to any

particular order or contract. The company reserves the right to make alterations

or amendments to the detailed specifications at its discretion. The publication of

information in this document does not imply freedom from patent or other

protective rights of Avaya or others.

All trademarks identified by the ® or ™ are registered trademarks or trademarks,

respectively, of Avaya Inc. All other trademarks are the property of their

respective owners.

This document contains proprietary information of Avaya and is not to be

disclosed or used except in accordance with applicable agreements.

© 2014 Avaya Inc. All rights reserved.

Template: 29th August 2013

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments