manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, User Manual, Page: 63 / 170

Share
Download
Avaya one-X Deskphone SIP 9620C User Manual Download Page 63

9600 Series User Guide

Page 63

 Issue 08b (10 April 2014)

IP Office 9.0

Contacts/Directory: Managing External Contacts

10.2 Viewing Contacts Details

1. Access the contacts directory:

a. Press the 

 CONTACTS key. The directory menu is displayed. 

b. Use the   left and right   arrow keys to select which type of directory entries you want to display. 

·

All 
All directory entries. 

·

External 
Directory entries stored by the telephone system for all users to use. 

·

Groups 
The names and numbers of hunt groups on the telephone system. 

·

Users 
The names and numbers of other users on the telephone system. 

·

Personal 
Your own personal directory entries. 

c. Use the 

 up and down 

 arrow keys to scroll through the list or start dialing the name you want to find to

display only matching entries. If you dial a name to return to the full list press the Clear soft key. 

d. To view more details of the highlighted name, press Details. To return to the directory press List. 

2. When the required entry is highlighted, press Details to display the name, number and type of contact. 

3. Use the 

 up and down 

 arrow key to scroll through the contacts. 

4. The range of soft keys available will depend on the type of directory entry: 

·

Call

 

Make a call to the stored number. 

·

List 
Return to the list of contacts. 

·

More 
If the contact is one of your personal directory entries, the More soft key will be present to allow you to
access the options below. It is also present for external directory entries if you have been set as a system
phone user by the system administrator. 

·

Edit

 

Edit the name and number. 

·

Delete

 

Delete the name and number. 

·

New

 

Add a new personal directory contact. 

64

66

66

65

Summary of Contents for one-X Deskphone SIP 9620C











































































































































































Reviews:

No comments