Avaya IP Office Voicemail Pro Installation And Maintenance Manual Download

Page: 62 / 286

Voicemail Pro Installation and Maintenance Guide

Page 62

Voicemail Pro Installation and Maintenance Guide

15-601063 Issue 15b (31 May 2006)

IP Office

Configuring VPNM Accounts with Voicemail Pro

To configure VPNM accounts with Voicemail Pro you need to add details of remote users to the VPNM
network.

To configure VPNM Accounts with Voicemail Pro

1. Start the Voicemail Pro Client.

2. Click

Preferences and select VPNM. As long as a VPNM licence is detected, the VPNM

window is displayed.

3. In the VPNM Servers area select Add.

4. Enter the fully qualified domain name of the remote VPNM destination (the remote Voicemail Pro

server PC or Avaya Interchange).

5. Enter the Access Prefix, if these are being used.

6. Click OK.

7. In the Users for VPNM Server(s) area, click Add.

The Adding a new user window is displayed.

Summary of Contents for IP Office Voicemail Pro































































































































































































































































































Search results

Summary of Contents for IP Office Voicemail Pro

Reviews:

Related manuals for IP Office Voicemail Pro

Brands by name

Popular brands

Avaya IP Office Voicemail Pro, Installation And Maintenance Manual

Search results

Summary of Contents for IP Office Voicemail Pro

Reviews:

Related manuals for IP Office Voicemail Pro

Brands by name

Popular brands