Voicemail Pro Installation and Maintenance Guide
Page 220
Voicemail Pro Installation and Maintenance Guide
15-601063 Issue 15b (31 May 2006)
IP Office
Adding a Shortcode:
1. In IP Office Manager, we added a new system short code. For this example we chose *74 and
then entered the details as shown below.
2. After merging this back into the IP Office, users can dial *74 at their extension To record their
mailbox name.
Using the Name Table
It is possible to create a service that will allow access to re-record the name of any mailbox. The
NameWavsTable does this by requesting an extension number and then allowing you to play, re-record
and submit a name recording for that extension. It then allows another extension number to be entered
and so on.
Naturally if this option is used it should be behind suitable PIN code and other security protection as it
allows the recording of names for any mailbox.
To use the Name table:
1. In Voicemail Pro, create a new module.
2. Add a Goto action and open its properties.
3. In the General tab, enter a unique number in the Pin.
4. In the Specific tab, in Please select a node to go to enter NameWavsTable.
5. Click OK.
6. Using a short code or other method, create a route to the new module.
