Voicemail Pro Installation and Maintenance Guide
Page 128
Voicemail Pro Installation and Maintenance Guide
15-601063 Issue 15b (31 May 2006)
IP Office
Configuring User Source Numbers
This tab in the User form gives a list of Source Numbers. Several of these numbers can relate to
voicemail operation.
Source Number: Default = V plus own extension number
Right-click within the Source Number area and click Add.
V<Callers CLI> = Voicemail Trusted Source access
Allows access to the user's mailbox from a specified CLI number, e.g. V201 or V7325551237 without
entering the mailbox access code. The default is the user's own extension number but additional
numbers may be added. Note: Only supported by Voicemail Lite and Voicemail Pro using IP Office
Mailbox mode.
H<Group Name> = Hunt Group Voicemail Indication
Allows the user to receive message waiting indication of new group messages. Enter H followed by the
group name, e.g. HMain. See Hunt Group Message Waiting Indication.
P<Telephone Number> = Voicemail Ringback Number
This entry sets the destination for callback (outbound alert) calls from voicemail. Enter P followed by the
telephone number including any necessary external dialing prefix, eg. P917325559876. This facility is
only available when using VoiceMail Pro through which a default Callback or a user specific Callback
start point has been configured. This feature is separate from voicemail ringback which alerts the user's
own extension. See Callback (Outcalling)
