Voicemail Pro Installation and Maintenance Guide
Page 37
IP Office
15-601063 Issue 15b (31 May 2006)
Installing the Voicemail Pro Client Only
Overview
You can install the Voicemail Pro Client without the Voicemail Pro Server. This is known as a partial
installation.
There is only one type of installation for the Voicemail Pro Client. Therefore you are not offered the
choice of custom, compact or typical during the installation process.
For information about Installing the Voicemail Pro Client only, see Installing the Voicemail Pro Client
Only.
For information about installing the Voicemail Pro Client and Server together, see Installing Compact
Voicemail Pro Server and Client, or Installing Typical Voicemail Pro Server and Client.
Installing the Voicemail Pro Client Only
You can install the Voicemail Pro Client on its own and use it to connect to a remote Voicemail Pro
server.
To install the Voicemail Pro Client only:
1. Insert the IP Office Voicemail Pro CD. The installation wizard should auto-start. If it does not
auto-start, browse to and run Setup.exe on the CD. The Choose Setup Language window is
displayed.
2. Select the installation language.
This language is used for the installation and for the default language prompts.
3. Click OK.
Installation preparation begins.
4. Voicemail Pro requires Microsoft .NET 1.1 Framework. If this version is not detected, you are
prompted to install it. Click Yes to install Microsoft .NET 1.1 Framework.
If the following window is displayed, Voicemail Pro is already installed. You need to upgrade rather
than install a new version. For more information, see Upgrading a Voicemail Pro System.
Otherwise the IP Office Voicemail Pro installation starts and the Welcome window is displayed.
