Autodesk 495B1-05A111-1301 - 3ds Max Design 2010, User Manual

Page: 562 / 916

To: Use:
Translate the mask in the X and Y direction. Translation X,Y
Add an offset to the translation of a garbage mask. Offset X,Y
Rotate the mask. Rotation
Change the mask's X or Y scale (or both with Link enabled). Scale
Adjust the X and Y location of the mask's center of rotation/scaling.
Use the Center button to set the pivot point to the center of the
mask's bounding box. Pivot
Reset all the transform parameters to their initial values. Reset
To translate the mask:
➤
Do one of the following:
■ Place the cursor inside the mask's bounding box, and click + hold and
then drag the mask to translate in any direction.
■ Type the position into the X, Y value editors and press Enter .
■ Click + drag inside the value editor.
550 | Chapter 23 Masking