Altigen MaxACD Administrator Manual Download Page 98

Page: 98 / 261

Chapter 10: Application Extension Configuration

MaxACD

Administrator

Manual

Figure 10-1. Application Extension Configuration window

To set up an application extension:
1. In the Application Extension Configuration window, click the

Add

button and enter

an extension number in the

Add Application Extension

dialog box. and click

Figure 10-2. Add Application Extension dialog box

2. The application extension appears in the

AppExt List

3. Type a password in the

Password

field.

4. Type a description of the application in the

Description

field, if desired.

5. Click

Application Failover Plan

The

Application Failover Plan

ensures that a call made to the extension will be

automatically transferred if the application is not available. Use the

If application is

not available, forward to

drop-down list to select the forwarding destination. The

options are:

Summary of Contents for MaxACD Administrator






































































































































































































































































Search results

Summary of Contents for MaxACD Administrator

Reviews:

Altigen MaxACD Administrator, Manual, Page: 98 / 261

Search results

Summary of Contents for MaxACD Administrator

Reviews: