manualshive.com logo in svg

Altigen MaxACD Administrator, Manual, Page: 140 / 261

Share
Download
Altigen MaxACD Administrator Manual Download Page 140

Chapter 15: Extension Configuration

130

  MaxACD Administrator Manual

Figure 15-7.  Extension Configuration, Mail Management tab

Setting an Information-Only Mailbox

You can check the 

Information Only Mailbox 

check box to set extension mailboxes to 

Information Only, then click 

Apply to

 to set one or more extension mailboxes.

An Information Only mailbox allows callers to listen to customized recorded 
announcements. This mailbox does not take messages from the caller. 

Disabling a Mailbox

When you disable a mailbox, a special greeting is played to announce that this mailbox 
is not accepting new messages.

Assign Exchange Integration License

Check this check box if the selected extension is to be integrated with Microsoft 
Exchange.

Summary of Contents for MaxACD Administrator






































































































































































































































































Reviews:

No comments