Altigen MaxACD Administrator Manual Download Page 143

Page: 143 / 261

Setting Message Notification Options

MaxACD Administrator Manual 133

Figure 15-8. Extension Configuration, Notification tab

Individual users can also configure

Message Notification

within the MaxAgent for Lync.

Note:

You can use

Apply to

to apply notification settings to one, some, or all

extensions. See “Using the Apply To Button” on page 124 for more information on
using

Apply to

Setting the Message Types for Notification

Select the types of messages for which the extension user is notified:

•

None

—No notification. Selecting this option does not prevent the user from getting

message waiting indicators or stutter dial tone when new messages are received.

•

Urgent Voice Messages Only

•

All Voice Messages

The system will perform notification under the following conditions:

•

Extension's message notification is set to

Urgent Voice Messages Only

•

Extension's notification Schedule is set to

Non-Business Hours

•

Voice mail received during business hours is marked urgent.

•

Extension user does not check the urgent message.

The system will start notification as soon as it enters non-business hours.

Note:

Message notification can also be set in MaxAgent, and the settings are reflected
in MaxACD Administrator.

Summary of Contents for MaxACD Administrator






































































































































































































































































Search results

Summary of Contents for MaxACD Administrator

Reviews:

Altigen MaxACD Administrator, Manual, Page: 143 / 261

Search results

Summary of Contents for MaxACD Administrator

Reviews: