manualshive.com logo in svg

Altigen MaxACD Administrator, Manual, Page: 215 / 261

Share
Download
Altigen MaxACD Administrator Manual Download Page 215

Configuring Redundancy

MaxACD Administrator Manual  205

Figure 20-6.  SIPSD and SIP Trunk dialog boxes

7. Log into MaxACD on the secondary server and replicate all of the settings from the 

primary server. Open MaxAdministrator and choose 

Extension

 

Configuration.

8. On the

 General

 tab, choose the number and click the 

Apply To

 button.

Step 5: Reboot Servers and Restart Services

You must reboot the servers and restart the service before you proceed. You can use the 
AltiGen

 Start & Stop all MaxACD Services

 tool for this; see “Start & Stop All MaxACD 

Services” on page 230.
1. Shut down all services of the secondary server.
2. Shut down all services of the primary server.
3. Restart all services of the primary server.
4. Restart all services of the secondary server.

Summary of Contents for MaxACD Administrator






































































































































































































































































Reviews:

No comments