manualshive.com logo in svg

Altigen MaxACD Administrator, Manual, Page: 182 / 261

Share
Download
Altigen MaxACD Administrator Manual Download Page 182

Chapter 18: Workgroup Configuration

172

  MaxACD Administrator Manual

Figure 18-14.  Workgroup Configuration, Call Handling tab

Handling Busy Calls

You have several options for handling calls when the workgroup extension is busy. If you 
do not enable busy call handling, the caller simply hears a busy signal. 
To enable the options, select the 

Enable Busy Call Handling

 check box, then select 

from the following forwarding options:

•

Group Queue

—The caller will stay in the workgroup queue waiting for any agent to 

become available. If there is no agent logged in at this moment, the system will use 

Group Logout Handling

 to handle this call.

•

Group

 

Voice

 

Mail

•

AA

—forward caller to an auto attendant.

•

Extension

—forward caller to an extension. 

•

Group

—forward caller to another group. 

•

Line Park

—forward caller to a Line Park group.

Forwarding All Calls

When you do not want the workgroup to handle any calls, check the 

Enable Forward 

To

 option in the Forward All Calls section of the 

Call Handling

 tab, and select an option.

The forwarding options are as follows:

•

To 

Voice Mail

Summary of Contents for MaxACD Administrator






































































































































































































































































Reviews:

No comments