manualshive.com logo in svg

Altigen MaxACD Administrator, Manual, Page: 109 / 261

Share
Download
Altigen MaxACD Administrator Manual Download Page 109

Selecting Trunks to Set Attributes

MaxACD Administrator Manual  99

Figure 12-3.  Trunk Configuration, General tab 

Selecting Trunks to Set Attributes

The title bar of the Trunk Configuration window displays the card and the channel of the 
selected trunk.
The list on the left shows all the configured trunks. The 

Location

 format is the same as 

in the Trunk View window, that is, 

Logical Component ID : Channel number

. The logical 

component ID is assigned by the system. This ID may change when a component is 
added into or removed from the system. 
When you select a trunk in this list, the options and parameters for the trunk appear in 
the settings in the right side of the window.

Configuring One or Multiple Trunks

To customize trunk characteristics, you work on one trunk at a time. To apply the same 
configuration to multiple trunks, use the 

Apply To

 button. This pops up a list of all 

trunks, with all of the trunks selected by default. Select the trunks you want to apply 
changes to, then click 

OK

. (Use 

Ctrl

+click and 

Shift

+click

 

to select several trunks.) This 

applies changes to multiple trunks for 

only the attribute or option that you changed

.

Summary of Contents for MaxACD Administrator






































































































































































































































































Reviews:

No comments