manualshive.com logo in svg

Altigen MaxACD Administrator, Manual, Page: 241 / 261

Share
Download
Altigen MaxACD Administrator Manual Download Page 241

Trace Collector

MaxACD Administrator Manual  231

Trace Collector

The Trace Collector is for use by experienced technicians. It collects trace for diagnostic 
purposes, and lets you upload the results to AltiGen Technical Support right from the 
Trace Collector dialog box. Technicians can run the Trace Collector tool from the 
Windows 

Start

 menu, and also from MaxACD Administrator’s 

Diagnostic

 menu. Log in 

with the super technician password "jazzy" and then the current password when logging 
into MaxACD Administrator. This enables the diagnostic menu options.

Note:

Trace Collector is not available from a MaxACD Administrator installed in a remote 
machine.

The Trace Collector first examines the running status of MaxACD and the gateway, and 
then checks whether each trace status is on or off. If a trace status is turned off, the 
MaxACD system will not produce those traces. A message box pops up if MaxACD and 
the gateway are not running or an important trace status is off.

Figure 23-7.  Trace Collector dialog box

Following are descriptions of the fields in the Trace Collector

Time Period for Extension Feature #66

: Defines how many hours you want to go 

back to collect trace, starting from the time you press 

#66

. The default value is 2 hours. 

Summary of Contents for MaxACD Administrator






































































































































































































































































Reviews:

No comments