Altigen MaxACD Administrator, Manual, Page: 205 / 261

Defining the IP Dialing Table
MaxACD Administrator Manual 195
Figure 19-6. Enterprise Manager IP Codec tab
By default, all private addresses are set to G.711 codec only. You can add individual IP
addresses and address ranges and assign a codec to each.
To add IP addresses and address ranges and assign a codec
1. Click the Add button in the IP Device Range panel. The Add IP Device Range dialog
box opens:
Figure 19-7. Add IP Device Range dialog box
2. Enter an IP address range (for dynamic IP addressing), or enter the same address
in each field if this is a static address. You cannot use the minimum and maximum
values (0.0.0.0. and 255.255.255.255).
3. Click OK .
Defining the IP Dialing Table
The IP Dialing Table is used for creating location-based VoIP routing in the enterprise. It
supports SIP dual protocol.
To use a MaxACD-to-MaxACD connection for VoIP, you need to configure the routing in
the IP Dialing Table for each MaxACD system.
Notes
•
You must assign an IP Trunk Access code ( System Configuration > Number Plan
tab)