Altigen MaxACD Administrator Manual Download Page 236

Page: 236 / 261

Chapter 23: Tools and Applications

226

MaxACD Administrator Manual

Figure 23-1. System Data Management window

Note:

The System Data Management window can only be accessed at the primary
MaxACD system; it is

not

available from a remote MaxACD Administrator client.

Backing Up Files

To back up files

1. Select the

Backup

icon to view the

Backup

Configuration

dialog box.

Figure 23-2. Backup Configuration dialog box

2. In the

Components

panel, select the files you want to back up.

3. In the

Backup

drop-down list, select the day of the week (each day has its own

folder in C:\altibackup for backing up files to), or select

Advanced

to change the

drive or select a different folder.
Selecting

Advanced

displays a folder icon. Click the folder icon to open a browse

dialog box that lets you select the folder to back up to. When you click

in the

dialog box, the selected drive or directory is displayed in the field below the

Backup

drop-down list.

4. Click

to start the backup.

In the window, the progress and status of the file backup is displayed.

Summary of Contents for MaxACD Administrator






































































































































































































































































Search results

Summary of Contents for MaxACD Administrator

Reviews:

Altigen MaxACD Administrator, Manual, Page: 236 / 261

Search results

Summary of Contents for MaxACD Administrator

Reviews: