Altigen MaxACD Administrator Manual Download Page 242

Page: 242 / 261

Chapter 23: Tools and Applications

232

MaxACD Administrator Manual

Case Number

: Enter the AltiGen case number associated with this trace collection

activity. The case number will comprise the first part of the file name of the collected
trace package.

Problem Description

: Enter a description of the problem, including the extension

number involved, the time when the problem happened, how to reproduce the problem,
and so on.

Time Range

: The tool collects the trace between the time ranges. The time range

covers before

and

after the defined Date and Time. The default Date and Time is one

hour before the current date and time, and the default variation is 60 minutes. This
setting is not applicable when

#66

is performed.

Trace Category

: By default, all options are selected.

•

Main MaxACD Trace

(\AltiServ\log)

Collects the following files, and extracts the trace records that fall in the specified
time range:

actrace.log

AlpErrLog.txt

SIPlog.txt

ALPxxx.txt

\atps\threadID.txtl

SIPMan.txt

altiserv.txt

\atps\cmdlog.txt

SIPPstnReg.txt

AltiBack_XXX.trc

AdvQOverflow.log

SipExtChanTbl.log

AltiKeep_XXX.trc

Ac2AppPathHdlTbl.txt

SIPKeepALive.txt

AnnouceRunLog.txt

FeatServ.txt

QESLLog.txt

AssertLog.txt

DbUpdateTrdLog.txt

AW_AstrCpyErrLog.txt

HGwGenLog.txt

Loggservice_Mutex.txt

CallQManLog.txt

HGwMsgLog.txt

MEMORYTRACE.txt

CDRLogDLL.txt

threadid.txt

NewCDRExt.txt

CDRLogTrace.txt

MidNightLog.txt

ConfigLog.txt

\logservice\Internal.txt

pathlog.txt

MsgOCLog.txt

ConfigServiceLog.txt

rsrclog.txt

MSRunLog.txt

CDRLogTrace.txt

RtpPortRangeTbl.txt

mviperr.txt

CDRLogDLL_EXCEPTION.txt

StartupLog.txt

Postman.txt

CSH323log.txt

Swxx_xxxx.txt

ProcInfoLog.txt

ExceptionLog.txt

GWMsgLog.txt

•

System Configuration Data

Collects system configuration data, including System, Extension, Trunk, AA
configurations, and Read OE files.

•

Service Provider Log Dump

Runs SPDump.exe to dump the SP log into files and then collects the trace.

•

IP Phone Trace Dump

Collects the IPPhone dump log in \AltiServ\Log\IPP.

•

Stand-alone Gateway Trace

Collects the trace on the stand-alone gateway machine. If MaxACD Services are shut
down, the option is disabled. If Trace Collector is running on the stand-alone

Summary of Contents for MaxACD Administrator






































































































































































































































































Search results

Summary of Contents for MaxACD Administrator

Reviews:

Altigen MaxACD Administrator, Manual, Page: 242 / 261

Search results

Summary of Contents for MaxACD Administrator

Reviews: