Altigen MaxACD Administrator Manual Download Page 24

Page: 24 / 261

Chapter 2: System Requirements and Installation

MaxACD

Administrator

Manual

MaxACD Client Applications - System Requirements

•

IBM/PC AT compatible system

•

Microsoft .NET 2.0 framework or higher

•

2 GHz CPU

•

1 GB available hard drive disk space

•

1 GB RAM

•

SVGA monitor (1024 x 768) with 256-color display or better

•

Keyboard and mouse

CDRs

The following external CDR databases are supported:

•

Microsoft SQL Server 2008

•

Microsoft SQL Server 2008 express

Note:

Running SQL Server in a MaxACD machine is not supported.

Online Help

•

Internet Explorer 6.0 or higher browser

Email Server Integration

•

Microsoft Exchange Server 2008

MaxACD Licenses

This section lists the licenses available for components of MaxACD.

MaxACD for Lync Server Licenses (Bundle license

9Lxxxx…

)

•

MaxACD for Lync License

•

HMCP Media Server License x 1 (supports up to 600 G.711 codecs)

•

HMCP Agent Supervision Session License x 20

•

AltiReport License

•

VRManager License

•

Multi-Lingual License

•

Advanced Call Router License

•

SIP Trunk License x 300

•

10 MaxAgent for Lync Licenses

•

1 MaxSupervisor for Lync License

MaxAgent for Lync Licenses (Bundle license

9Axxxx…

)

MaxACD supports up to 256 agents.

•

Station License x 1

•

ACM Agent Seat License x 1

•

MaxAgent Seat x 1

Summary of Contents for MaxACD Administrator






































































































































































































































































Search results

Summary of Contents for MaxACD Administrator

Reviews:

Altigen MaxACD Administrator, Manual, Page: 24 / 261

Search results

Summary of Contents for MaxACD Administrator

Reviews: