Parameters 383
Defines a target for the data received as word 3 from the third
follower (ie. the follower with node address 4) through the
master/follower link.
See also parameter
.
For the selections, see parameter
.
(Follower only) Displays, in integer format, the data received
from the master as word 1.
Parameter
can be used to select a
target for the received data. This parameter can also be used
as a signal source by other parameters.
0
0…65535
Data received as word 1 in master/follower communication.
(Follower only) Displays, in integer format, the data received
from the master as word 2.
Parameter
can be used to select a
target for the received data. This parameter can also be used
as a signal source by other parameters.
0
0…65535
Data received as word 2 in master/follower communication.
(Follower only) Displays, in integer format, the data received
from the master as word 3.
Parameter
can be used to select a
target for the received data. This parameter can also be used
as a signal source by other parameters.
0
0…65535
Data received as word 3 in master/follower communication.
Displays, in integer format, the data received from the first
follower (ie. follower with node address 2) as word 1.
Parameter
can be used to
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 1 from follower with node address 2.
Displays, in integer format, the data received from the first
follower (ie. follower with node address 2) as word 2.
Parameter
can be used to
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 2 from follower with node address 2.
Displays, in integer format, the data received from the first
follower (ie. follower with node address 2) as word 3.
Parameter
can be used to
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 3 from follower with node address 2.
Displays, in integer format, the data received from the second
follower (ie. follower with node address 3) as word 1.
Parameter
can be used to
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 1 from follower with node address 3.
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
