![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539329.webp)
Parameters 329
Displays the currently active brake open torque. See
parameters
.
This parameter is read-only.
-
-1600.0 … 1600.0% Currently active brake open torque.
See par.
Activates/deactivates (or selects a source that
activates/deactivates) the mechanical brake control logic.
0 = Brake control inactive
1 = Brake control active
Note:
This parameter cannot be changed while the drive is
running.
Not selected
0.
0
Selected
1.
1
DI1
Digital input DI1 (
, bit 0).
2
DI2
Digital input DI2 (
, bit 1).
3
DI3
Digital input DI3 (
, bit 2).
4
DI4
Digital input DI4 (
, bit 3).
5
DI5
Digital input DI5 (
, bit 4).
6
DI6
Digital input DI6 (
, bit 5).
7
DIO1
Digital input/output DIO1 (
, bit 0).
10
DIO2
Digital input/output DIO2 (
, bit 1).
11
Source selection (see
). -
Activates/deactivates (and selects the source for) brake
open/close status (acknowledgement) supervision.
When a brake control error (unexpected state of the
acknowledgement signal) is detected, the drive reacts as
defined by parameter
0 = Brake closed
1 = Brake open
Off
0.
0
On
1.
1
No acknowledge
Brake open/closed supervision disabled.
2
DI1
Digital input DI1 (
, bit 0).
3
DI2
Digital input DI2 (
, bit 1).
4
DI3
Digital input DI3 (
, bit 2).
5
DI4
Digital input DI4 (
, bit 3).
6
DI5
Digital input DI5 (
, bit 4).
7
DI6
Digital input DI6 (
, bit 5).
8
DIO1
Digital input/output DIO1 (
, bit 0).
11
DIO2
Digital input/output DIO2 (
, bit 1).
12
Source selection (see
). -
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
