
Parameters 423
DI6
Digital input DI6 (
, bit 5).
7
DIO1
Digital input/output DIO1 (
, bit 0).
10
DIO2
Digital input/output DIO2 (
, bit 1).
11
Source selection (see
). -
See parameter
Selects the unit of parameters indicating power, temperature
and torque.
0000 0000b
0000 0000b …
0001 0101b
Unit selection word.
1 = 1
Defines the 1st priority external source for synchronization of
the drive’s time and date.
The date and time can also be directly set into
in which case this parameter is ignored.
Internal
No external source selected.
0
DDCS Controller
External controller.
1
Fieldbus A or B
Fieldbus interface A or B.
2
Fieldbus A
Fieldbus interface A.
3
Fieldbus B
Fieldbus interface B.
4
D2D or M/F
The master station on a master/follower or drive-to-drive link.
5
Embedded FB
Embedded fieldbus interface.
6
Panel link
Control panel, or Drive composer PC tool connected to the
control panel.
8
Ethernet tool link
Drive composer PC tool through an FENA module.
9
M/F and D2D clock
synchronization
In the master drive, activates clock synchronization for
master/follower and drive-to-drive communication.
Inactive
Clock synchronization not active.
0
Active
Clock synchronization active.
1
No.
Name/Value
Description
Def
/
FbEq16
Bit
Name
Information
0
Power unit
0 = kW
1 = hp
1
Reserved
2
Temperature
unit
0 = C (°C)
1 = F (°F)
3
Reserved
4
Torque unit
0 = Nm (N·m)
1 = lbft (lbf·ft)
5…15
Reserved
Summary of Contents for ACS880-x04
