![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539220.webp)
220 Parameters
Displays the value of speed reference before application of
critical speeds. See the control chain diagram on page
The value is received from
unless overridden by
• any constant speed
• a jogging reference
•
reference
• control panel reference
• safe speed reference.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference before application of critical speeds.
See par.
23
Speed reference ramp settings (programming of the
acceleration and deceleration rates for the drive).
See the control chain diagram on page
Displays the used speed reference (in rpm) before it enters
the ramping and shaping functions. See the control chain
diagram on page
.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference before ramping and shaping.
See par.
Displays the ramped and shaped speed reference in rpm. See
the control chain diagram on page
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after ramping and shaping.
See par.
Selects the source that switches between the two sets of
acceleration/deceleration ramp times defined by parameters
.
0 = Acceleration time 1 and deceleration time 1 are active
1 = Acceleration time 2 and deceleration time 2 are active
b1)
Acc/Dec time 1
0.
0
Acc/Dec time 2
1.
1
DI1
Digital input DI1 (
, bit 0).
2
DI2
Digital input DI2 (
, bit 1).
3
DI3
Digital input DI3 (
, bit 2).
4
DI4
Digital input DI4 (
, bit 3).
5
DI5
Digital input DI5 (
, bit 4).
6
DI6
Digital input DI6 (
, bit 5).
7
DIO1
Digital input/output DIO1 (
, bit 0).
10
DIO2
Digital input/output DIO2 (
, bit 1).
11
). -
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
